# Docs

- v1: Pterodactyl 1.x
  - [Pterodactyl 1.x](/v1): Installation, administration, and API documentation for Pterodactyl 1.x.
  - Project Information
    - [Introduction](/v1/project): Open-source game server management panel built with PHP, React, and Go
    - [About](/v1/project/about): Information about the Pterodactyl project team, sponsors, and licensing
    - [Terminology](/v1/project/terminology): Key terms and concepts used throughout Pterodactyl documentation
    - [Community Standards](/v1/project/community): Guidelines and expectations for participating in the Pterodactyl community
  - Panel
    - [Getting Started](/v1/panel/getting-started): Complete guide to installing Pterodactyl Panel with all dependencies and initial configuration.
    - [Webserver Configuration](/v1/panel/webserver-configuration): Configure your webserver to serve the Pterodactyl Panel
    - [Additional Configuration](/v1/panel/additional-configuration): Additional configuration options for Pterodactyl Panel
    - [Updating the Panel](/v1/panel/updating): Guide for updating Pterodactyl Panel within the 1.x series
    - [Troubleshooting](/v1/panel/troubleshooting): Common issues and solutions for Pterodactyl Panel
  - Wings
    - [Wings](/v1/wings): Server control plane documentation for Pterodactyl Wings
    - [Installing Wings](/v1/wings/installing): Guide for installing Wings 1.0 server control plane
    - [Additional Configuration](/v1/wings/configuration): Advanced configuration options for Wings
    - [Upgrading Wings](/v1/wings/upgrading): Guide for upgrading Wings to newer versions
    - [Migrating to Wings](/v1/wings/migrating): Guide for migrating from the old Node.JS daemon to Wings
  - Community Guides
    - Panel Installation
      - [Debian 11, 12 & 13](/v1/guides/panel-installation/debian): Install Pterodactyl Panel on Debian 11, 12, and 13
      - [CentOS 7](/v1/guides/panel-installation/centos7): Install Pterodactyl Panel on CentOS 7 with all dependencies and SSL configuration
      - [Enterprise Linux 8 and Fedora Server 40](/v1/guides/panel-installation/centos8): Install Pterodactyl Panel on CentOS 8, Rocky Linux 8, AlmaLinux 8, and Fedora Server 40
    - Wings Installation
      - [CentOS 7](/v1/guides/wings-installation/centos7): Install Pterodactyl Wings on CentOS 7
      - [Enterprise Linux 8 and Fedora Server 40](/v1/guides/wings-installation/centos8): Install Pterodactyl Wings on CentOS 8, Rocky Linux 8, AlmaLinux 8, and Fedora Server 40
    - Tutorials
      - [Creating SSL Certificates](/v1/guides/tutorials/ssl-certificates): Create and manage SSL certificates for Pterodactyl Panel and Wings
      - [Setting up MySQL](/v1/guides/tutorials/mysql-setup): Configure MySQL databases for Pterodactyl Panel and game servers
      - [Artisan CLI](/v1/guides/tutorials/artisan): Learn how to use Laravel's Artisan CLI for managing your Pterodactyl Panel
    - Configuration
      - [Creating a New Node](/v1/guides/configuration/add-node): Step-by-step guide to adding a new node to your Pterodactyl Panel
      - [Upgrading PHP](/v1/guides/configuration/php-upgrade): Upgrade PHP to the latest version for your Pterodactyl Panel
      - [Using Mounts](/v1/guides/configuration/mounts): Mount directories from the host file-system into server containers
    - Egg Creation
      - [Creating a Custom Egg](/v1/guides/egg-creation/creating-custom-egg): Learn how to create custom eggs for your Pterodactyl Panel
      - [Egg Docker Images](/v1/guides/egg-creation/egg-docker-images): Available Docker images and yolks for Pterodactyl eggs
      - [Configuration Files & Startup Detection](/v1/guides/egg-creation/egg-config-parser): Configure process management, startup detection, and config file parsing for Pterodactyl eggs
      - [Egg Variables](/v1/guides/egg-creation/egg-variables): Define and manage custom and default variables for Pterodactyl eggs
      - [Egg Install Script](/v1/guides/egg-creation/egg-install-script): Write install scripts that set up server files for Pterodactyl eggs
      - [Creating a Custom Docker Image](/v1/guides/egg-creation/creating-custom-image): Build custom Docker images for use with Pterodactyl eggs
    - Customization
      - [Building Panel Assets](/v1/guides/customization/panel): Learn how to build and customize Pterodactyl Panel assets
      - [Building Wings](/v1/guides/customization/wings): Compile and customize Pterodactyl Wings from source
    - Games
      - [Minecraft](/v1/guides/games/minecraft): Configure Minecraft server networks with BungeeCord, Waterfall, and other proxy servers
  - API Reference (1.x)
    - [API Overview](/v1/api): The Pterodactyl 1.x APIs and how to authenticate with them.

    - **Client API**
    - Client general
      - [List servers](/v1/api/client-general/get-list-servers)
      - [Show permissions](/v1/api/client-general/get-show-permissions)
    - Client account
      - [Delete API key](/v1/api/client-account/delete-delete-api-key)
      - [2FA details](/v1/api/client-account/get-2fa-details)
      - [Account activity](/v1/api/client-account/get-account-activity)
      - [Account details](/v1/api/client-account/get-account-details)
      - [List API keys](/v1/api/client-account/get-list-api-keys)
      - [List SSH keys](/v1/api/client-account/get-list-ssh-keys)
      - [Create API key](/v1/api/client-account/post-create-api-key)
      - [Create SSH key](/v1/api/client-account/post-create-ssh-key)
      - [Disable 2FA](/v1/api/client-account/post-disable-2fa)
      - [Enable 2FA](/v1/api/client-account/post-enable-2fa)
      - [Remove SSH key](/v1/api/client-account/post-remove-ssh-key)
      - [Update email](/v1/api/client-account/put-update-email)
      - [Update password](/v1/api/client-account/put-update-password)
    - Client server
      - [Console details](/v1/api/client-server/get-console-details)
      - [Resource usage](/v1/api/client-server/get-resource-usage)
      - [Server activity](/v1/api/client-server/get-server-activity)
      - [Server details](/v1/api/client-server/get-server-details)
      - [Change power state](/v1/api/client-server/post-change-power-state)
      - [Send command](/v1/api/client-server/post-send-command)
    - Client server databases
      - [Delete database](/v1/api/client-server-databases/delete-delete-database)
      - [List databases](/v1/api/client-server-databases/get-list-databases)
      - [Create database](/v1/api/client-server-databases/post-create-database)
      - [Rotate password](/v1/api/client-server-databases/post-rotate-password)
    - Client server file manager
      - [Download file](/v1/api/client-server-file-manager/get-download-file)
      - [Get file contents](/v1/api/client-server-file-manager/get-get-file-contents)
      - [List files](/v1/api/client-server-file-manager/get-list-files)
      - [Upload file](/v1/api/client-server-file-manager/get-upload-file)
      - [Change file permissions](/v1/api/client-server-file-manager/post-chmod-file)
      - [Compress file](/v1/api/client-server-file-manager/post-compress-file)
      - [Copy file](/v1/api/client-server-file-manager/post-copy-file)
      - [Create folder](/v1/api/client-server-file-manager/post-create-folder)
      - [Decompress file](/v1/api/client-server-file-manager/post-decompress-file)
      - [Delete file](/v1/api/client-server-file-manager/post-delete-file)
      - [Pull remote file](/v1/api/client-server-file-manager/post-pull-file)
      - [Write file](/v1/api/client-server-file-manager/post-write-file)
      - [Rename file](/v1/api/client-server-file-manager/put-rename-file)
    - Client server schedules
      - [Delete schedule](/v1/api/client-server-schedules/delete-delete-schedule)
      - [Delete  task](/v1/api/client-server-schedules/delete-delete-task)
      - [List schedules](/v1/api/client-server-schedules/get-list-schedules)
      - [Schedule details](/v1/api/client-server-schedules/get-schedule-details)
      - [Create schedule](/v1/api/client-server-schedules/post-create-schedule)
      - [Create task](/v1/api/client-server-schedules/post-create-task)
      - [Execute schedule](/v1/api/client-server-schedules/post-execute-schedule)
      - [Update schedule](/v1/api/client-server-schedules/post-update-schedule)
      - [Update task](/v1/api/client-server-schedules/post-update-task)
    - Client server network
      - [Unassign allocation](/v1/api/client-server-network/delete-unassign-allocation)
      - [List allocations](/v1/api/client-server-network/get-list-allocations)
      - [Assign allocation](/v1/api/client-server-network/post-assign-allocation)
      - [Set allocation note](/v1/api/client-server-network/post-set-allocation-note)
      - [Set primary allocation](/v1/api/client-server-network/post-set-primary-allocation)
    - Client server users
      - [Delete user](/v1/api/client-server-users/delete-delete-user)
      - [List Users](/v1/api/client-server-users/get-list-users)
      - [User details](/v1/api/client-server-users/get-user-details)
      - [Create User](/v1/api/client-server-users/post-create-user)
      - [Update user](/v1/api/client-server-users/post-update-user)
    - Client server backups
      - [Delete backup](/v1/api/client-server-backups/delete-delete-backup)
      - [Backup details](/v1/api/client-server-backups/get-backup-details)
      - [Download backup](/v1/api/client-server-backups/get-download-backup)
      - [List backups](/v1/api/client-server-backups/get-list-backups)
      - [Create backup](/v1/api/client-server-backups/post-create-backup)
      - [Restore backup](/v1/api/client-server-backups/post-restore-backup)
      - [Toggle backup lock](/v1/api/client-server-backups/post-toggle-backup-lock)
    - Client server startup
      - [List Variables](/v1/api/client-server-startup/get-list-variables)
      - [Update Variable](/v1/api/client-server-startup/put-update-variable)
    - Client server settings
      - [Reinstall server](/v1/api/client-server-settings/post-reinstall-server)
      - [Rename server](/v1/api/client-server-settings/post-rename-server)
      - [Update Docker image](/v1/api/client-server-settings/put-update-docker-image)

    - **Application API**
    - Application users
      - [Delete user](/v1/api/application-users/delete-delete-user)
      - [List users](/v1/api/application-users/get-list-users)
      - [User details](/v1/api/application-users/get-user-details)
      - [User details by external ID](/v1/api/application-users/get-user-external-details)
      - [Update user](/v1/api/application-users/patch-update-user)
      - [Create user](/v1/api/application-users/post-create-user)
    - Application nodes
      - [Delete node](/v1/api/application-nodes/delete-delete-node)
      - [List deployable nodes](/v1/api/application-nodes/get-deployable-nodes)
      - [List nodes](/v1/api/application-nodes/get-list-nodes)
      - [Node configuration](/v1/api/application-nodes/get-node-configuration)
      - [Node details](/v1/api/application-nodes/get-node-details)
      - [Update node](/v1/api/application-nodes/patch-update-node)
      - [Create node](/v1/api/application-nodes/post-create-node)
    - Application nodes allocations
      - [Delete allocation](/v1/api/application-nodes-allocations/delete-delete-allocation)
      - [List allocations](/v1/api/application-nodes-allocations/get-list-allocations)
      - [Create allocations](/v1/api/application-nodes-allocations/post-create-allocations)
    - Application locations
      - [Delete location](/v1/api/application-locations/delete-delete-location)
      - [List locations](/v1/api/application-locations/get-list-locations)
      - [Location details](/v1/api/application-locations/get-location-details)
      - [Update location](/v1/api/application-locations/patch-update-location)
      - [Create location](/v1/api/application-locations/post-create-location)
    - Application servers
      - [Delete server](/v1/api/application-servers/delete-delete-server)
      - [Force delete server](/v1/api/application-servers/delete-force-delete-server)
      - [List servers](/v1/api/application-servers/get-list-servers)
      - [Server details](/v1/api/application-servers/get-server-details)
      - [Server details by external ID](/v1/api/application-servers/get-server-external-details)
      - [Update build](/v1/api/application-servers/patch-update-build)
      - [Update details](/v1/api/application-servers/patch-update-details)
      - [Update startup](/v1/api/application-servers/patch-update-startup)
      - [Create server](/v1/api/application-servers/post-create-server)
      - [Reinstall server](/v1/api/application-servers/post-reinstall-server)
      - [Suspend server](/v1/api/application-servers/post-suspend-server)
      - [Unsuspend server](/v1/api/application-servers/post-unsuspend-server)
    - Application servers database management
      - [Delete database](/v1/api/application-servers-database-management/delete-delete-database)
      - [Database details](/v1/api/application-servers-database-management/get-database-details)
      - [List databases](/v1/api/application-servers-database-management/get-list-databases)
      - [Create database](/v1/api/application-servers-database-management/post-create-database)
      - [Reset password](/v1/api/application-servers-database-management/post-reset-password)
    - Application nests
      - [List nests](/v1/api/application-nests/get-list-nests)
      - [Nest details](/v1/api/application-nests/get-nest-details)
    - Application nests eggs management
      - [Egg details](/v1/api/application-nests-eggs-management/get-egg-details)
      - [List eggs](/v1/api/application-nests-eggs-management/get-list-eggs)
- v2: Pterodactyl 2.0
  - [Pterodactyl 2.0](/v2): Documentation for Pterodactyl Panel 2.0.
  - Project Information
    - [Introduction](/v2/project): Pterodactyl is an open-source game server management panel built with PHP, React, and Go.
    - [About](/v2/project/about): Information about the Pterodactyl project team, sponsors, and licensing
    - [How Pterodactyl Works](/v2/project/how-it-works): The parts of Pterodactyl, the terms these pages use, and the ports between them.
    - [Community Standards](/v2/project/community): Guidelines and expectations for participating in the Pterodactyl community
    - [Using AI With Pterodactyl](/v2/project/using-ai): AI assistants are tools you choose to use. What that means for you, what support to expect, and how to give an assistant the docs.
  - Panel
    - [Requirements](/v2/panel/requirements): The software Pterodactyl 2.0 needs, and how it works with Wings.
    - [Getting Started](/v2/panel/getting-started): Install Pterodactyl Panel 2.0 on your own server.
    - [Docker Deployment](/v2/panel/docker): Run the Pterodactyl 2.0 Panel with Docker Compose.
    - [Webserver Configuration](/v2/panel/webserver-configuration): Configure NGINX, Apache, or Caddy to serve the Panel.
    - [Additional Configuration](/v2/panel/additional-configuration): Configure backups, reverse proxies, reCAPTCHA, two-factor authentication, and telemetry.
    - [Updating the Panel](/v2/panel/updating): Update Pterodactyl Panel to a newer 2.x release.
    - [Troubleshooting](/v2/panel/troubleshooting): Find and fix common problems with the Panel and Wings.
  - Wings
    - [Installing Wings](/v2/wings/installing): Install Wings, the service that runs your game servers, on a node.
    - [Configuration](/v2/wings/configuration): What each setting in Wings' config.yml does, and when to change it.
    - [Upgrading Wings](/v2/wings/upgrading): Upgrade Wings to a newer version.
  - Extensions
    - [Extensions](/v2/extensions): Install, configure, and manage extensions that add features to your Panel.
    - [Building Extensions](/v2/extensions/building): Create an extension with API endpoints, settings, pages, and additions to the Panel's interface.
    - [Backend](/v2/extensions/backend): Give an extension a service provider, routes, authorization, migrations, settings, and background work.
    - [Frontend](/v2/extensions/frontend): Add to the Panel's interface with slots, screens, detail tabs, table columns, and component replacements.
    - [Data and Styling](/v2/extensions/data-and-styling): Read Panel data, call your extension's API, style components, and translate text.
    - [Testing and Packaging](/v2/extensions/testing-and-packaging): Test an extension, build it, package it for release, and keep it secure.
    - [Extension Reference](/v2/extensions/reference): The manifest, commands, backend helpers, SDK, and slots available to extensions.
  - Upgrading From 1.x
    - [Changes From 1.x](/v2/upgrading/changes-from-v1): The changes in Pterodactyl 2.0 that affect existing 1.x installations.
    - [Upgrading From 1.x](/v2/upgrading/upgrading-from-v1): Upgrade a native 1.x Panel installation to Pterodactyl 2.0.
    - [Testing the Upgrade](/v2/upgrading/testing-the-upgrade): Try the 1.x to 2.0 upgrade on a copy of your Panel before you upgrade the real one.
  - Community Guides
    - Tutorials
      - [Creating SSL Certificates](/v2/guides/tutorials/ssl-certificates): Get free certificates from Let's Encrypt for the Panel and for Wings.
      - [Setting Up MySQL](/v2/guides/tutorials/mysql-setup): Create the Panel's database, and database hosts that give your servers their own databases.
      - [Artisan Commands](/v2/guides/tutorials/artisan): Manage users, nodes, servers, and the Panel itself from the command line.
    - Configuration
      - [Creating a Node](/v2/guides/configuration/add-node): Add a node to the Panel, give it allocations, and connect Wings to it.
      - [Upgrading PHP](/v2/guides/configuration/php-upgrade): Move the Panel to a newer version of PHP.
      - [Using Mounts](/v2/guides/configuration/mounts): Share a directory from a node with the servers on it.
    - Egg Creation
      - [Creating a Custom Egg](/v2/guides/egg-creation/creating-custom-egg): Import an egg, or create your own, and organize eggs with tags.
      - [Docker Images](/v2/guides/egg-creation/egg-docker-images): Choose the Docker images an egg's servers run in.
      - [Startup and Configuration](/v2/guides/egg-creation/egg-config-parser): Control how Wings starts, watches, stops, and configures a server.
      - [Egg Variables](/v2/guides/egg-creation/egg-variables): Let users and administrators change a server's settings without editing its startup command.
      - [Install Scripts](/v2/guides/egg-creation/egg-install-script): Write the script that downloads and sets up a server's files.
      - [Creating a Custom Image](/v2/guides/egg-creation/creating-custom-image): Build your own Docker image for an egg, when the official images do not fit.
    - Customization
      - [Themes](/v2/guides/customization/themes): Change the Panel's colors and shapes without rebuilding it.
      - [Building Panel Assets](/v2/guides/customization/panel): Rebuild the Panel's frontend after you change its source code.
      - [Building Wings](/v2/guides/customization/wings): Compile Wings from its source code.
    - Games
      - [Minecraft Proxy Networks](/v2/guides/games/minecraft): Run a BungeeCord, Waterfall, or Velocity network, with backend servers hidden from the internet.
  - API Reference (2.0)
    - [API Overview](/v2/api): The Pterodactyl 2.0 APIs and how to authenticate with them.
    - Admin API: Root administrator endpoints for managing panel configuration and resources.
      - [List languages](/v2/api/admin-api/adminListLanguages): Returns the languages available for panel locale selectors.
      - [List extensions](/v2/api/admin-api/adminListExtensions): Returns discovered extensions, invalid manifests, and their install state.
      - [Install extension](/v2/api/admin-api/adminInstallExtension): Installs an uploaded .pteroext or .zip extension package.
      - [Get extension settings](/v2/api/admin-api/adminGetExtensionSettings): Returns the auto-render form schema (with current public values) for an extension that registered a settings definition.
      - [Update extension settings](/v2/api/admin-api/adminUpdateExtensionSettings): Validates against the extension's declared rules and persists the submitted values. Omitted fields keep their stored values.
      - [Enable extension](/v2/api/admin-api/adminEnableExtension): Enables an installed extension, publishes assets, and runs migrations.
      - [Disable extension](/v2/api/admin-api/adminDisableExtension): Disables an installed extension without removing files or data.
      - [Remove extension](/v2/api/admin-api/adminRemoveExtension): Deletes extension files, published assets, and the install record.
      - [List users](/v2/api/admin-api/adminListUsers): Returns a paginated list of panel users, sorted with root administrators first by default.
      - [Create user](/v2/api/admin-api/adminCreateUser): Creates a panel user. Optional password and language fields may be supplied explicitly.
      - [Get user by external ID](/v2/api/admin-api/adminGetUserByExternalID): Returns a single panel user by external identifier.
      - [Get user](/v2/api/admin-api/adminGetUser): Returns a single panel user by internal numeric ID.
      - [Delete user](/v2/api/admin-api/adminDeleteUser): Deletes a panel user. The authenticated administrator cannot delete their own account.
      - [Disable user two-factor authentication](/v2/api/admin-api/adminDisableUserTwoFactorAuthentication): Clears the configured TOTP secret and disables two-factor authentication for a user.
      - [Update user](/v2/api/admin-api/adminUpdateUser): Updates an existing panel user. Supplying a password changes the user password.
      - [Get node system information](/v2/api/admin-api/adminGetNodeSystemInformation): Proxies Wings system information for a node.
      - [Create node deploy token](/v2/api/admin-api/adminCreateNodeDeployToken): Creates or reuses an application API key that can deploy the specified node.
      - [Get node utilization](/v2/api/admin-api/adminGetNodeUtilization): Returns aggregate resource utilization for a node.
      - [List server mounts](/v2/api/admin-api/adminListServerMounts): Returns mount definitions that are eligible for a server, including whether each mount is attached.
      - [Attach server mount](/v2/api/admin-api/adminAttachServerMount): Attaches an eligible mount definition to a server.
      - [Detach server mount](/v2/api/admin-api/adminDetachServerMount): Detaches a mount definition from a server.
      - [List servers](/v2/api/admin-api/adminListServers): Returns a paginated list of servers.
      - [Create server](/v2/api/admin-api/adminCreateServer): Creates a server using explicit allocations or automatic deployment constraints.
      - [Get server by external ID](/v2/api/admin-api/adminGetServerByExternalID): Returns a single server by external identifier.
      - [Get server](/v2/api/admin-api/adminGetServer): Returns a single server by admin identifier.
      - [Delete server](/v2/api/admin-api/adminDeleteServer): Deletes a server and returns an error if Wings or database host cleanup fails.
      - [Update server details](/v2/api/admin-api/adminUpdateServerDetails): Updates a server name, owner, description, and external identifier.
      - [Update server build](/v2/api/admin-api/adminUpdateServerBuild): Updates server limits, primary allocation, and feature limits.
      - [Update server startup](/v2/api/admin-api/adminUpdateServerStartup): Updates the egg, Docker image, startup command, environment, and install-script behavior.
      - [Update server suspension](/v2/api/admin-api/adminUpdateServerSuspension): Suspends or unsuspends a server.
      - [Reinstall server](/v2/api/admin-api/adminReinstallServer): Queues a server reinstall through Wings.
      - [Rebuild server](/v2/api/admin-api/adminRebuildServer): Synchronizes the server configuration to Wings.
      - [Get server transfer progress](/v2/api/admin-api/adminGetServerTransferProgress): Returns the active transfer for a server, or 204 when no transfer is in progress.
      - [Transfer server](/v2/api/admin-api/adminTransferServer): Starts a server transfer to another node using the specified target allocations.
      - [Toggle server install state](/v2/api/admin-api/adminToggleServerInstallState): Toggles a server between installed and installing states unless it is marked as failed.
      - [Force delete server](/v2/api/admin-api/adminForceDeleteServer): Deletes a server while bypassing recoverable Wings or database host cleanup failures.
      - [List server databases](/v2/api/admin-api/adminListServerDatabases): Returns all databases assigned to a server.
      - [Create server database](/v2/api/admin-api/adminCreateServerDatabase): Creates a database for a server and returns the generated password.
      - [Get server database](/v2/api/admin-api/adminGetServerDatabase): Returns a single database assigned to a server.
      - [Delete server database](/v2/api/admin-api/adminDeleteServerDatabase): Deletes a database assigned to a server.
      - [Rotate server database password](/v2/api/admin-api/adminRotateServerDatabasePassword): Rotates the password for a database assigned to a server.
      - [List server backups](/v2/api/admin-api/adminListServerBackups): Returns a paginated list of backups assigned to a server.
      - [Toggle server backup lock](/v2/api/admin-api/adminToggleServerBackupLock): Toggles whether a server backup is locked against deletion.
      - [List nodes](/v2/api/admin-api/adminListNodes): Returns a paginated list of Wings nodes.
      - [Create node](/v2/api/admin-api/adminCreateNode): Creates a Wings node. HTTPS nodes must use a valid FQDN rather than a raw IP address.
      - [Get node](/v2/api/admin-api/adminGetNode): Returns a single Wings node by ID.
      - [Delete node](/v2/api/admin-api/adminDeleteNode): Deletes a node when it has no active servers.
      - [Get node configuration](/v2/api/admin-api/adminGetNodeConfiguration): Returns the raw Wings configuration payload for a node, including daemon authentication tokens.
      - [Update node](/v2/api/admin-api/adminUpdateNode): Updates a Wings node and optionally rotates its daemon secret.
      - [Sync node game tags](/v2/api/admin-api/adminSyncNodeGameTags): Replaces the games a node accepts. A node with no game tags accepts any egg.
      - [Sync node deployment tags](/v2/api/admin-api/adminSyncNodeDeploymentTags): Replaces the reservations on a node. A deploy must declare exactly these tags to land here.
      - [List node allocations](/v2/api/admin-api/adminListNodeAllocations): Returns a paginated list of allocations for a node.
      - [Create node allocations](/v2/api/admin-api/adminCreateNodeAllocations): Creates one or more allocations on a node from IP addresses and ports or port ranges.
      - [Bulk delete node allocations](/v2/api/admin-api/adminBulkDeleteNodeAllocations): Deletes multiple unassigned allocations from a node by allocation ID.
      - [List node allocation IPs](/v2/api/admin-api/adminListNodeAllocationIPs): Returns distinct allocation IP addresses for a node.
      - [List available node allocations](/v2/api/admin-api/adminListAvailableNodeAllocations): Returns unassigned allocations for a node.
      - [Delete node allocation IP block](/v2/api/admin-api/adminDeleteNodeAllocationIPBlock): Deletes every unassigned allocation for an IP address on a node.
      - [Update node allocation](/v2/api/admin-api/adminUpdateNodeAllocation): Updates the alias for a single allocation on a node.
      - [Delete node allocation](/v2/api/admin-api/adminDeleteNodeAllocation): Deletes a single unassigned allocation from a node.
      - [List locations](/v2/api/admin-api/adminListLocations): Returns a paginated list of locations.
      - [Create location](/v2/api/admin-api/adminCreateLocation): Creates a location for grouping nodes and servers.
      - [Get location](/v2/api/admin-api/adminGetLocation): Returns a single location by ID.
      - [Delete location](/v2/api/admin-api/adminDeleteLocation): Deletes a location when no dependent resources prevent removal.
      - [List eligible location nodes](/v2/api/admin-api/adminListEligibleLocationNodes): Returns nodes assigned to a location that can be selected for location-scoped workflows.
      - [Update location](/v2/api/admin-api/adminUpdateLocation): Updates a location short identifier and description.
      - [List mounts](/v2/api/admin-api/adminListMounts): Returns a paginated list of mount definitions.
      - [Create mount](/v2/api/admin-api/adminCreateMount): Creates a mount definition and generates its UUID.
      - [Get mount](/v2/api/admin-api/adminGetMount): Returns a single mount definition by ID.
      - [Delete mount](/v2/api/admin-api/adminDeleteMount): Deletes a mount definition.
      - [Update mount](/v2/api/admin-api/adminUpdateMount): Updates an existing mount definition.
      - [Attach eggs to mount](/v2/api/admin-api/adminAttachEggsToMount): Attaches one or more eggs to a mount definition without removing existing egg attachments.
      - [Detach egg from mount](/v2/api/admin-api/adminDetachEggFromMount): Removes a single egg attachment from a mount definition.
      - [Attach nodes to mount](/v2/api/admin-api/adminAttachNodesToMount): Attaches one or more nodes to a mount definition without removing existing node attachments.
      - [Detach node from mount](/v2/api/admin-api/adminDetachNodeFromMount): Removes a single node attachment from a mount definition.
      - [List egg catalog](/v2/api/admin-api/adminListEggCatalog): Returns the cached Pterodactyl egg catalog for searching and filtering. The index is cached for one hour.
      - [Refresh egg catalog](/v2/api/admin-api/adminRefreshEggCatalog): Clears the cached Pterodactyl catalog so the next listing downloads the current index.
      - [Import catalog egg](/v2/api/admin-api/adminImportCatalogEgg): Downloads the selected entry from the Pterodactyl catalog and imports its egg definition and variables.
      - [List egg variables](/v2/api/admin-api/adminListEggVariables): Returns variables for an egg in display order.
      - [Create egg variable](/v2/api/admin-api/adminCreateEggVariable): Creates a startup variable for an egg.
      - [Reorder egg variables](/v2/api/admin-api/adminReorderEggVariables): Updates the display order for variables on an egg.
      - [Update egg variable](/v2/api/admin-api/adminUpdateEggVariable): Updates a startup variable for an egg.
      - [Delete egg variable](/v2/api/admin-api/adminDeleteEggVariable): Deletes a startup variable from an egg.
      - [Get egg install script](/v2/api/admin-api/adminGetEggInstallScript): Returns an egg with its install script block.
      - [Update egg install script](/v2/api/admin-api/adminUpdateEggInstallScript): Updates the install script configuration for an egg.
      - [Export egg](/v2/api/admin-api/adminExportEgg): Downloads an egg share JSON file.
      - [Update egg from import](/v2/api/admin-api/adminUpdateEggFromImport): Updates an existing egg from an uploaded egg share JSON file.
      - [Sync egg tags](/v2/api/admin-api/adminSyncEggTags): Replaces the tags applied to an egg. Values may be tag IDs or new tag names.
      - [Import egg](/v2/api/admin-api/adminImportEgg): Creates an egg from an uploaded egg share JSON file.
      - [List eggs](/v2/api/admin-api/adminListEggs): Returns a paginated list of egg definitions.
      - [Create egg](/v2/api/admin-api/adminCreateEgg): Creates an egg definition.
      - [Get egg](/v2/api/admin-api/adminGetEgg): Returns a single egg definition by ID.
      - [Delete egg](/v2/api/admin-api/adminDeleteEgg): Deletes an egg definition.
      - [Update egg](/v2/api/admin-api/adminUpdateEgg): Updates an egg definition.
      - [List tags](/v2/api/admin-api/adminListTags): Returns a paginated list of tags.
      - [Create tag](/v2/api/admin-api/adminCreateTag): Creates a tag.
      - [Get tag](/v2/api/admin-api/adminGetTag): Returns a single tag by ID.
      - [Delete tag](/v2/api/admin-api/adminDeleteTag): Deletes a tag and detaches it from every egg and node.
      - [Update tag](/v2/api/admin-api/adminUpdateTag): Updates an existing tag. Built-in game tags cannot be edited.
      - [Get settings](/v2/api/admin-api/adminGetSettings): Returns current general, mail, advanced, and metadata settings.
      - [Update general settings](/v2/api/admin-api/adminUpdateGeneralSettings): Updates panel branding, 2FA requirements, and default locale settings.
      - [Update mail settings](/v2/api/admin-api/adminUpdateMailSettings): Updates SMTP mail settings and restarts queued workers so they reload configuration.
      - [Send test mail](/v2/api/admin-api/adminSendTestMail): Sends a test email to the authenticated administrator using the configured mail transport.
      - [Update advanced settings](/v2/api/admin-api/adminUpdateAdvancedSettings): Updates reCAPTCHA, HTTP client timeout, and client allocation feature settings.
      - [List database hosts](/v2/api/admin-api/adminListDatabaseHosts): Returns a paginated list of database hosts.
      - [Create database host](/v2/api/admin-api/adminCreateDatabaseHost): Creates a database host after validating that the panel can connect to it.
      - [Get database host](/v2/api/admin-api/adminGetDatabaseHost): Returns a single database host by ID.
      - [Delete database host](/v2/api/admin-api/adminDeleteDatabaseHost): Deletes a database host when no server databases depend on it.
      - [Update database host](/v2/api/admin-api/adminUpdateDatabaseHost): Updates a database host after validating that the panel can connect to the supplied host details.
      - [List database host databases](/v2/api/admin-api/adminListDatabaseHostDatabases): Returns a paginated list of server databases assigned to a database host.
      - [List API keys](/v2/api/admin-api/adminListAPIKeys): Returns a paginated list of application API keys.
      - [Create API key](/v2/api/admin-api/adminCreateAPIKey): Creates a new application API key and returns the plaintext secret token once.
      - [Get API key](/v2/api/admin-api/adminGetAPIKey): Returns a single application API key by identifier without exposing its token.
      - [Delete API key](/v2/api/admin-api/adminDeleteAPIKey): Deletes an application API key by identifier.
      - [Update API key](/v2/api/admin-api/adminUpdateAPIKey): Updates an application API key memo and resource permissions without regenerating the token.
      - [Get version information](/v2/api/admin-api/adminGetVersionInformation): Returns panel, Wings, and project version metadata.
    - Application API: Root administrator endpoints for managing panel resources using application API tokens.
      - [List users](/v2/api/application-api/applicationListUsers): Returns a paginated list of panel users visible to the application API key.
      - [Create user](/v2/api/application-api/applicationCreateUser): Creates a new panel user and returns the created resource.
      - [Get user](/v2/api/application-api/applicationGetUser): Returns a single panel user by internal numeric ID.
      - [Update user](/v2/api/application-api/applicationUpdateUser): Updates account details for an existing panel user.
      - [Delete user](/v2/api/application-api/applicationDeleteUser): Deletes a panel user by internal numeric ID.
      - [Get user by external ID](/v2/api/application-api/applicationGetUserByExternalID): Returns a single panel user by its external identifier.
      - [List nodes](/v2/api/application-api/applicationListNodes): Returns a paginated list of Wings nodes registered on the panel.
      - [Create node](/v2/api/application-api/applicationCreateNode): Creates a new Wings node and returns the created resource.
      - [List deployable nodes](/v2/api/application-api/applicationListDeployableNodes): Returns nodes that can satisfy the requested memory, disk, and optional location deployment constraints.
      - [Get node](/v2/api/application-api/applicationGetNode): Returns a single Wings node by internal numeric ID.
      - [Delete node](/v2/api/application-api/applicationDeleteNode): Deletes a Wings node by internal numeric ID when no servers are attached.
      - [Get node configuration](/v2/api/application-api/applicationGetNodeConfiguration): Returns the Wings configuration payload for a node, including node authentication tokens.
      - [Update node](/v2/api/application-api/applicationUpdateNode): Updates an existing Wings node by internal numeric ID.
      - [List node allocations](/v2/api/application-api/applicationListNodeAllocations): Returns a paginated list of allocations belonging to a node.
      - [Create node allocations](/v2/api/application-api/applicationCreateNodeAllocations): Assigns one or more allocation ports to a node.
      - [Delete node allocation](/v2/api/application-api/applicationDeleteNodeAllocation): Deletes an allocation from a node when no server is using it.
      - [List locations](/v2/api/application-api/applicationListLocations): Returns a paginated list of all locations registered on the panel.
      - [Create location](/v2/api/application-api/applicationCreateLocation): Creates a new location and returns the created resource.
      - [Get location](/v2/api/application-api/applicationGetLocation): Returns a single location by internal numeric ID.
      - [Update location](/v2/api/application-api/applicationUpdateLocation): Updates an existing location by internal numeric ID.
      - [Delete location](/v2/api/application-api/applicationDeleteLocation): Deletes a location by internal numeric ID.
      - [List eggs](/v2/api/application-api/applicationListEggs): Returns a paginated list of server eggs available on the panel.
      - [Get egg](/v2/api/application-api/applicationGetEgg): Returns a single egg by internal numeric ID.
      - [List tags](/v2/api/application-api/applicationListTags): Returns a paginated list of the tags that group eggs.
      - [Get tag](/v2/api/application-api/applicationGetTag): Returns a single tag by internal numeric ID.
      - [List servers](/v2/api/application-api/applicationListServers): Returns a paginated list of servers visible to the application API key.
      - [Create server](/v2/api/application-api/applicationCreateServer): Creates a new server using either explicit allocations or automatic deployment constraints.
      - [Get server](/v2/api/application-api/applicationGetServer): Returns a single server by internal numeric ID.
      - [Delete server](/v2/api/application-api/applicationDeleteServerForServersServerId): Deletes a server. The force route bypasses recoverable Wings or database host deletion failures.
      - [Get server by external ID](/v2/api/application-api/applicationGetServerByExternalID): Returns a single server by its external identifier.
      - [Update server details](/v2/api/application-api/applicationUpdateServerDetails): Updates ownership and display details for a server.
      - [Update server build](/v2/api/application-api/applicationUpdateServerBuild): Updates resource limits, feature limits, and allocations for a server.
      - [Update server startup](/v2/api/application-api/applicationUpdateServerStartup): Updates startup command, image, egg, and environment variables for a server.
      - [Suspend server](/v2/api/application-api/applicationSuspendServer): Marks a server as suspended and syncs the state to Wings.
      - [Unsuspend server](/v2/api/application-api/applicationUnsuspendServer): Clears a server suspension and syncs the state to Wings.
      - [Reinstall server](/v2/api/application-api/applicationReinstallServer): Marks a server for reinstall and asks Wings to reinstall it.
      - [Delete server](/v2/api/application-api/applicationDeleteServerForServersServerIdForce): Deletes a server. The force route bypasses recoverable Wings or database host deletion failures.
      - [List server databases](/v2/api/application-api/applicationListServerDatabases): Returns all databases attached to a server.
      - [Create server database](/v2/api/application-api/applicationCreateServerDatabase): Creates a database for a server on a configured database host.
      - [Get server database](/v2/api/application-api/applicationGetServerDatabase): Returns a single database attached to a server.
      - [Delete server database](/v2/api/application-api/applicationDeleteServerDatabase): Deletes a database attached to a server.
      - [Reset server database password](/v2/api/application-api/applicationResetServerDatabasePassword): Rotates the password for a database attached to a server.
    - Authentication: Browser session authentication endpoints used by the panel frontend.
      - [Login](/v2/api/authentication/authLogin): Authenticates a browser session. Returns a complete login payload, or a two-factor checkpoint token when the account requires a second factor.
      - [Complete login checkpoint](/v2/api/authentication/authCompleteLoginCheckpoint): Completes a two-factor login checkpoint using either a TOTP code or a recovery token.
      - [Request password reset email](/v2/api/authentication/authRequestPasswordResetEmail): Sends a password reset email when the account exists. The response is intentionally the same when no matching account is found.
      - [Reset password](/v2/api/authentication/authResetPassword): Resets an account password using a password reset token. The response tells the frontend whether the user must return to the login form.
      - [Logout](/v2/api/authentication/authLogout): Destroys the current browser session and regenerates the CSRF token.
      - [Get CSRF cookie](/v2/api/authentication/authGetCsrfCookie): Initializes the Laravel Sanctum CSRF cookie required before browser-session authentication requests.
    - Client API: Endpoints authenticated as a panel user using a client API token.
      - [List client servers](/v2/api/client-api/clientListClientServers): Returns a paginated list of servers the authenticated user can access as an owner, subuser, or administrator.
      - [List server permissions](/v2/api/client-api/clientListServerPermissions): Returns the permission keys that can be granted to server subusers.
      - [Get account](/v2/api/client-api/clientGetAccount): Returns profile details for the authenticated user.
      - [Get two-factor setup](/v2/api/client-api/clientGetTwoFactorSetup): Creates or returns the current two-factor setup payload for the authenticated user.
      - [Enable two-factor authentication](/v2/api/client-api/clientEnableTwoFactorAuthentication): Enables two-factor authentication for the authenticated user and returns one-time recovery tokens.
      - [Disable two-factor authentication](/v2/api/client-api/clientDisableTwoFactorAuthentication): Disables two-factor authentication for the authenticated user after verifying their password.
      - [Update account email](/v2/api/client-api/clientUpdateAccountEmail): Updates the authenticated user's email address after verifying their current password.
      - [Update account password](/v2/api/client-api/clientUpdateAccountPassword): Updates the authenticated user's password and revokes other active sessions where supported.
      - [List account activity](/v2/api/client-api/clientListAccountActivity): Returns a paginated list of activity log entries for the authenticated user account.
      - [List account API keys](/v2/api/client-api/clientListAccountAPIKeys): Returns all client API keys owned by the authenticated user.
      - [Create account API key](/v2/api/client-api/clientCreateAccountAPIKey): Creates a client API key for the authenticated user and returns the secret token once.
      - [Delete account API key](/v2/api/client-api/clientDeleteAccountAPIKey): Deletes one client API key owned by the authenticated user.
      - [List SSH keys](/v2/api/client-api/clientListSSHKeys): Returns all SSH public keys configured for the authenticated user.
      - [Create SSH key](/v2/api/client-api/clientCreateSSHKey): Adds an SSH public key to the authenticated user account.
      - [Delete SSH key](/v2/api/client-api/clientDeleteSSHKey): Deletes an SSH key from the authenticated user account by fingerprint. Missing keys are treated as already deleted.
      - [Get server](/v2/api/client-api/clientGetServer): Returns details for one server the authenticated user can access.
      - [Get websocket credentials](/v2/api/client-api/clientGetWebsocketCredentials): Returns a short-lived Wings websocket token and socket URL for the server.
      - [Get server resources](/v2/api/client-api/clientGetServerResources): Returns the latest cached resource utilization reported by Wings for the server.
      - [List server activity](/v2/api/client-api/clientListServerActivity): Returns a paginated list of activity log entries for the server.
      - [Send server command](/v2/api/client-api/clientSendServerCommand): Sends a console command to the running server through Wings.
      - [Send power action](/v2/api/client-api/clientSendPowerAction): Sends a power signal to the server through Wings.
      - [List server databases](/v2/api/client-api/clientListServerDatabases): Returns databases attached to a server visible to the authenticated user.
      - [Create server database](/v2/api/client-api/clientCreateServerDatabase): Creates a database for a server on an automatically selected database host.
      - [Rotate server database password](/v2/api/client-api/clientRotateServerDatabasePassword): Rotates the password for a database attached to a server and returns the updated database.
      - [Delete server database](/v2/api/client-api/clientDeleteServerDatabase): Deletes a database attached to a server.
      - [List files](/v2/api/client-api/clientListFiles): Returns files and folders in a server directory.
      - [Get file contents](/v2/api/client-api/clientGetFileContents): Returns raw text contents for a server file.
      - [Get file download URL](/v2/api/client-api/clientGetFileDownloadURL): Returns a short-lived signed URL for downloading a server file directly from Wings.
      - [Rename files](/v2/api/client-api/clientRenameFiles): Renames one or more files or folders in a server directory.
      - [Copy file](/v2/api/client-api/clientCopyFile): Creates a copy of a file on the server.
      - [Write file contents](/v2/api/client-api/clientWriteFileContents): Writes the raw request body to a server file. This endpoint does not expect a JSON wrapper for the file contents.
      - [Compress files](/v2/api/client-api/clientCompressFiles): Creates an archive from one or more files or folders in a server directory.
      - [Decompress file](/v2/api/client-api/clientDecompressFile): Extracts an archive in a server directory.
      - [Delete files](/v2/api/client-api/clientDeleteFiles): Deletes one or more files or folders from a server directory.
      - [Create folder](/v2/api/client-api/clientCreateFolder): Creates a folder in a server directory.
      - [Change file permissions](/v2/api/client-api/clientChangeFilePermissions): Updates POSIX mode bits for one or more files or folders in a server directory.
      - [Pull remote file](/v2/api/client-api/clientPullRemoteFile): Requests that Wings download a remote file into a server directory.
      - [Get file upload URL](/v2/api/client-api/clientGetFileUploadURL): Returns a short-lived signed URL for uploading a file directly to Wings.
      - [List server schedules](/v2/api/client-api/clientListServerSchedules): Returns all schedules configured for the server, including their tasks.
      - [Create server schedule](/v2/api/client-api/clientCreateServerSchedule): Creates a schedule for the server.
      - [Get server schedule](/v2/api/client-api/clientGetServerSchedule): Returns one schedule configured for the server, including its tasks.
      - [Update server schedule](/v2/api/client-api/clientUpdateServerSchedule): Updates a schedule for the server and recalculates its next run time.
      - [Delete server schedule](/v2/api/client-api/clientDeleteServerSchedule): Deletes a schedule and its tasks from the server.
      - [Execute server schedule](/v2/api/client-api/clientExecuteServerSchedule): Queues a schedule to run immediately regardless of its active state.
      - [Create schedule task](/v2/api/client-api/clientCreateScheduleTask): Creates a task in a server schedule.
      - [Update schedule task](/v2/api/client-api/clientUpdateScheduleTask): Updates a task in a server schedule, including its sequence position.
      - [Delete schedule task](/v2/api/client-api/clientDeleteScheduleTask): Deletes a task from a server schedule and compacts subsequent sequence IDs.
      - [List server allocations](/v2/api/client-api/clientListServerAllocations): Returns all network allocations assigned to the server.
      - [Create server allocation](/v2/api/client-api/clientCreateServerAllocation): Assigns an available allocation to the server.
      - [Update allocation notes](/v2/api/client-api/clientUpdateAllocationNotes): Updates notes attached to a server allocation.
      - [Delete server allocation](/v2/api/client-api/clientDeleteServerAllocation): Removes a non-primary allocation from the server and returns it to the available pool.
      - [Set primary allocation](/v2/api/client-api/clientSetPrimaryAllocation): Sets the primary network allocation for the server.
      - [List server subusers](/v2/api/client-api/clientListServerSubusers): Returns subusers assigned to the server.
      - [Create server subuser](/v2/api/client-api/clientCreateServerSubuser): Assigns an existing or new user as a subuser on the server.
      - [Get server subuser](/v2/api/client-api/clientGetServerSubuser): Returns one subuser assignment for the server.
      - [Update server subuser](/v2/api/client-api/clientUpdateServerSubuser): Updates permissions for a server subuser and revokes their SFTP access tokens.
      - [Delete server subuser](/v2/api/client-api/clientDeleteServerSubuser): Removes a subuser assignment from the server and revokes SFTP access tokens.
      - [List server backups](/v2/api/client-api/clientListServerBackups): Returns a paginated list of backups for the server.
      - [Create server backup](/v2/api/client-api/clientCreateServerBackup): Starts a new backup for the server.
      - [Get server backup](/v2/api/client-api/clientGetServerBackup): Returns information about one server backup.
      - [Delete server backup](/v2/api/client-api/clientDeleteServerBackup): Deletes a backup record and its stored archive.
      - [Get backup download URL](/v2/api/client-api/clientGetBackupDownloadURL): Returns a signed URL for downloading a server backup.
      - [Toggle backup lock](/v2/api/client-api/clientToggleBackupLock): Toggles whether a backup is locked against deletion.
      - [Restore server backup](/v2/api/client-api/clientRestoreServerBackup): Restores a backup over the server files.
      - [Get startup configuration](/v2/api/client-api/clientGetStartupConfiguration): Returns the rendered startup command, available Docker images, raw startup command, and user-visible variables for the server.
      - [Update startup variable](/v2/api/client-api/clientUpdateStartupVariable): Updates one editable startup variable for the server and returns the updated rendered startup command.
      - [Rename server](/v2/api/client-api/clientRenameServer): Updates the server name and optionally its description.
      - [Reinstall server](/v2/api/client-api/clientReinstallServer): Queues a reinstall of the server on Wings.
      - [Set server Docker image](/v2/api/client-api/clientSetServerDockerImage): Updates the server Docker image to one of the images allowed by the server egg.